Box Styles and the FEFCO Code
Module 3 · Box Design

Box Styles and the FEFCO Code

Learn the common corrugated box styles — RSC, HSC, OSC, FOL, telescope, trays, and die-cut mailers — and how the international FEFCO/ESBO code names them.

A Shared Language for Boxes

There are thousands of box designs, but most are variations on a few families. The FEFCO/ESBO International Fibreboard Case Code — maintained by the European corrugated and solid board associations and used worldwide — gives each standard style a four-digit number. A buyer in Ohio and a box plant in Vietnam can both say “0201” and mean exactly the same box.

FEFCO seriesFamily
02xxSlotted boxes — one piece, glued/taped/stitched joint, top and bottom flaps
03xxTelescope boxes — separate lid and base that slide over each other
04xxFolder boxes and trays — usually one piece, folded, often die-cut with locking tabs
05xxSlide boxes — sleeves and inner trays
06xxRigid boxes — separate ends joined to a body
07xxReady-glued cases — ship flat, pop open with minimal assembly
09xxInterior fitments — partitions, pads, liners

The Regular Slotted Container (RSC) — FEFCO 0201

The RSC is the most common box in the world, and the most efficient — it wastes almost no board.

outer flapdepth = W ÷ 2outer flapinner flapssame depthLength (L)Width (W)Depth (D)
  • All four flaps on each end are the same depth — half the box width.
  • The two outer (major) flaps meet in the center when closed.
  • The two inner (minor) flaps don’t meet unless the box is square.
  • One manufacturer’s joint (glued, taped, or stitched) closes the tube.

The RSC is cheap and versatile. Its weakness: the center seam on top, and a gap between inner flaps that leaves the product unsupported in the middle.


Other Slotted Styles

StyleFEFCODescriptionWhen to use
Half slotted container (HSC)0200RSC with only one set of flaps; open topUsed with a separate cover, or as a tray
Overlap slotted container (OSC)0202Outer flaps overlap by an inch or moreLong, narrow boxes where flaps wouldn’t meet well
Full overlap (FOL)0203Outer flaps each span the full widthHeavy or rough handling; flaps double the top and bottom strength
Center special slotted (CSSC)0204Both inner and outer flaps meet in the centerFull, flat support on top and bottom

Telescope, Trays, and Die-Cuts

  • Telescope (03xx): a base and a lid. Full telescope lids cover the whole depth (heavy-duty storage). Partial telescope lids cover part of it — like a shoebox or a document box (0301 style).
  • Trays (04xx and others): shallow, open-top designs for produce and retail-ready packaging. Many are die-cut with locking tabs so they assemble without glue.
  • Roll-end tuck-top mailer (FEFCO 0427): the classic e-commerce and subscription box — a die-cut, one-piece mailer with dust flaps and a tuck lid. Usually E or B flute, often printed.

Die-cut styles can do almost anything, but they cost more: they need a die, run slower, and generate more trim waste than an RSC.

⚠️ Common Pitfall: Choosing a Style Without Checking Board Usage

Common mistake: picking a FOL or a fancy die-cut mailer for its looks or strength, then being surprised by the price.

A FOL box uses noticeably more board than an RSC of the same size, and a die-cut adds tooling and trim. For a pallet-stacked shipper, a well-designed RSC with the right board grade is usually the cheapest way to hit the strength target. Use premium styles where they actually earn their cost — presentation, unboxing, or extreme handling.


Key Takeaway

The FEFCO code is the international shorthand for box styles. The RSC (0201) is the most common and efficient box. HSC, OSC, FOL, and CSSC are slotted variations; telescopes, trays, and die-cuts cover lids, retail displays, and mailers — at higher cost.

🧪 Try It: Classify Your Boxes

Gather five boxes from home — shipping boxes, a pizza box, a shoebox, a produce tray. For each, identify the family (slotted, telescope, folder/tray, die-cut) and the closest FEFCO code. Then ask: why did the brand pick this style? Cost, protection, presentation, or ease of packing?

🧠 Knowledge Check

1. What is the FEFCO code for a Regular Slotted Container?

2. In an RSC, how deep is each flap?

3. Which style has outer flaps that each span the full width of the box?

4. What is a typical drawback of die-cut styles compared to an RSC?

5. A shoebox with a separate lid belongs to which FEFCO family?