Module 6 · Sustainability, Safety, and Review

Glossary and Course Review

Review the essential vocabulary of corrugated packaging, work a full box specification from start to finish, and test yourself across the whole course.

The Whole Journey

  1. 1 Paper rolls

    Linerboard and medium from the mill

  2. 2 Corrugator

    Flutes formed, liners glued, sheets cut and scored

  3. 3 Converting

    Printed, slotted, die-cut, glued

  4. 4 Packing

    Erected, filled, sealed, palletized

  5. 5 Distribution

    Stacked, shipped, handled

  6. 6 Recycling

    Collected and baled as OCC

Used boxes are baled as OCC and return to the mill as new linerboard and medium.

Glossary

TermMeaning
BCTBox compression test — top-to-bottom strength of a box
BlankThe flat, cut, and scored piece before it’s folded into a box
BMCBox Maker’s Certificate — the stamp stating board rating and limits
CaliperThickness of the board
Double backerCorrugator section where the inside liner is glued and cured on hot plates
ECTEdge crush test — edgewise compression strength of board, in lb/in
FEFCO codeInternational four-digit code for box styles (e.g., 0201)
FFGFlexo folder-gluer — prints, slots, scores, folds, and glues boxes
FluteOne wave of the corrugated medium; sizes A, B, C, E, F
LinerboardThe flat facing papers of corrugated board
Manufacturer’s jointThe glued, taped, or stitched seam that closes the box tube
McKee formulaBCT ≈ 5.87 × ECT × √(caliper × perimeter)
MediumThe fluted middle paper
MSFThousand square feet — the unit for pricing board
MullenBurst test, in psi
OCCOld corrugated containers
RSCRegular slotted container — FEFCO 0201
Single facerCorrugator section that forms flutes and glues the first liner
Take-up factorLength of medium used per length of board
WarpBoard that isn’t flat, usually from moisture imbalance

🧪 Try It: Capstone: Spec a Box

A customer ships 24 cans in a 4 × 6 arrangement. The pack measures 15.5 × 10.4 × 4.9 in and weighs 22 lb. Pallets are stacked 8 high, stored up to 30 days at about 70% RH, and the customer wants to interlock for load stability.

Work through it:

  1. Style: a low-cost shipper → RSC (0201). Might a tray + shrink film work instead?
  2. Inside dimensions: add small clearance → about 15.75 × 10.625 × 5 in.
  3. Required load on the bottom box: 7 boxes above × 22 lb = 154 lb.
  4. Derating: 0.60 (30 days) × 0.80 (70% RH) × 0.55 (interlock) ≈ 0.264.
  5. Needed lab BCT: 154 ÷ 0.264 ≈ 585 lbf (before any extra safety margin).
  6. Board: try 32 ECT B flute, caliper ~0.12 in, perimeter 2 × (15.75 + 10.625) = 52.75 in. BCT ≈ 5.87 × 32 × √(0.12 × 52.75) ≈ 5.87 × 32 × 2.52 ≈ 473 lbf — not enough.
  7. Options: move to 44 ECT (≈ 650 lbf), column-stack instead of interlocking (factor rises to ~0.48, so 32 ECT would suffice), or let the cans carry part of the load.

Which option would you recommend, and why? There’s more than one defensible answer — that’s packaging engineering.

Final Review

🧠 Knowledge Check

1. Which flute is the standard for most shipping boxes?

2. Double-wall board contains…

3. ECT is most closely related to which box property?

4. Where is the first liner glued to the medium on the corrugator?

5. Most warp is caused by…

6. An RSC's flaps are each…

7. What's the approximate blank size of a 20 × 14 × 12 RSC (ignoring allowances), with a 1.5 in joint?

8. Which converting problem reduces box compression strength?

9. Which print method suits a short run with many SKU versions?

10. A box tested at 600 lbf BCT will be stored 90 days at 90% RH. Using factors 0.55 and 0.50, about how much strength remains?