Dimensions, Blank Layout, and Structural Design
Module 3 · Box Design

Dimensions, Blank Layout, and Structural Design

State box dimensions correctly, lay out an RSC blank and calculate its size, understand caliper allowances and the manufacturer's joint, and see how structural designers move from CAD to sample.

Stating Box Dimensions

Box dimensions are always given as Length × Width × Depth, and always as inside dimensions — the space available for the product.

  • Length (L): the longer side of the opening
  • Width (W): the shorter side of the opening
  • Depth (D): the distance between the openings (sometimes called height)

So a box described as 18 × 12 × 10 has an 18 × 12 opening and is 10 deep. A box that is 12 × 18 × 10 is not a valid description — the first number is always the longer side of the opening.

⚠️ Common Pitfall: Measuring the Outside and Calling It the Size

Common mistake: measuring a sample box on the outside and ordering “the same size.”

Outside dimensions include the board thickness on both sides — up to about ¼ inch (6 mm) larger per dimension for C flute, and more for double wall. A box made to your outside measurements as inside dimensions will be too big; the product rattles, and you pay for extra board and void fill. Always measure and specify inside.


Laying Out an RSC Blank

A box starts life as a flat blank. For an RSC, the blank is a long strip with four panels side by side plus a joint tab, and flaps above and below.

LWLWflap = W/2flapflapflapflap = W/2flapflapflapjointBlank length ≈ joint + L + W + L + W≈ D + Wdashed = score lines · gaps between flaps = slots · flutes run vertically (parallel to D)

For an RSC with inside dimensions L × W × D:

  • Blank length ≈ 2L + 2W + joint tab (typically ~1¼–1½ in / 30–40 mm)
  • Blank width ≈ D + W (flap depth W/2 on top + depth D + flap depth W/2 on bottom)

Worked Example

Inside dimensions 18 × 12 × 10 in, joint tab 1.5 in:

  • Blank length ≈ 2(18) + 2(12) + 1.5 = 61.5 in
  • Blank width ≈ 10 + 12 = 22 in
  • Board area ≈ 61.5 × 22 = 1,353 in² ≈ 9.4 ft² per box

That area, multiplied by the order quantity and board price per thousand square feet (MSF), drives most of the box cost. Designers usually reduce cost by shrinking the box, not by cutting board grade.

Caliper Allowances

Real blanks are a bit larger than these formulas. Because the board has thickness, the score-to-score panel dimensions are increased by an allowance so the inside dimensions come out right after folding. Allowances depend on the flute (for example, a fraction of an inch more per panel for C flute than for E flute). Every box plant has its own allowance tables matched to its equipment.


Flute Direction and the Manufacturer’s Joint

In an RSC, flutes run vertically — parallel to the depth — so each wall acts like a row of columns. That’s what gives a box its stacking strength.

The manufacturer’s joint closes the tube. It can be:

  • Glued — the most common; fast and strong
  • Taped — for some heavy-duty or specialty applications
  • Stitched — metal staples, often for heavy double- and triple-wall boxes

From Idea to Box: The Design Workflow

  1. 1 Brief

    Product size, weight, fragility, distribution, quantity

  2. 2 CAD design

    Structural software (e.g., ArtiosCAD) draws the blank from a style library

  3. 3 Sample

    A CAD sample table cuts and creases a real prototype

  4. 4 Test & trial

    Pack product, compression and drop tests

  5. 5 Spec & tooling

    Approve the spec; order dies and print plates

  6. 6 Production

    Corrugator + converting

Sample fails a test or a packing trial? Revise the CAD and cut a new sample.

Structural designers also add inserts, partitions, and pads, and work with graphic designers so artwork lands on the right panels.


Key Takeaway

Always specify inside dimensions as L × W × D, with L the longer side of the opening. An RSC blank is about 2L + 2W + joint long and D + W high, with caliper allowances added. Flutes run vertically for stacking strength. New boxes move from brief → CAD → sample → test → spec.

🧪 Try It: Lay Out Your Own Blank

Pick a product at home — a stack of books works well — and measure it. Add about ¼ inch to each dimension for clearance. Calculate the RSC blank size and the square footage per box. Then try a different orientation of the product (swap which dimension is the depth). Does the square footage change? Usually it does — and that’s a free cost saving designers look for.

🧠 Knowledge Check

1. How are box dimensions conventionally stated?

2. What is the approximate blank length of an RSC?

3. For a 16 × 10 × 8 RSC, what is the approximate blank width (height of the flat blank)?

4. In an RSC, flutes normally run…

5. What is a CAD sample table used for?