Fundamentals and Hose Construction
Module 1 · Fundamentals and Hose Construction

Fundamentals and Hose Construction

Understand why hydraulic hoses replaced rigid pipes and how a hose is built — its three core components and the types of reinforcement used in real-world applications.

Why Hydraulic Hose?

Early hydraulic systems used rigid pipes and tubes. Hydraulic hose replaced them because it offers significant practical advantages in real-world equipment.

A hose:

  • Is less costly to manufacture and replace
  • Weighs less, reducing overall equipment load
  • Absorbs shock and vibration better than rigid pipe
  • Is easier to route and install around complex machinery
  • Requires no brazing or specialized bending
  • Allows movement between components of equipment
  • Is less likely to rust
  • Absorbs sound better
  • Dampens pressure surges in the system

The international marketplace for hydraulic assemblies is growing every day — making this knowledge increasingly valuable across industries.


Hose Construction

Every hydraulic hose is made up of three core components: the Tube, the Reinforcement, and the Cover. Each layer has a distinct role.

ID1. Tubecarries the fluid2. Reinforcementresists the pressure3. Covershields against abrasion, ozone, heat, chemicals

1. The Tube

The Tube is the innermost layer — the conduit through which fluid flows.

Tube construction varies based on:

  • a) The materials being conveyed — different fluids (oil, water-based, synthetic) require compatible tube materials
  • b) The temperature of the material — extreme heat or cold affects which compound is used

Key fact: The Inside Diameter (ID) of the tube determines the size of the hose. Always size a hose by its ID, not its outside diameter.


2. The Reinforcement

The Reinforcement is the muscle of the hose. It provides the strength to resist internal pressure — or external pressure in suction/vacuum applications.

There are three basic configurations:

TypeDescriptionUse Case
BraidedWire or textile, single or multiple layersGeneral hydraulic applications
SpiraledWire wound in 4 or 6 layers (plies)Demanding, high-pressure applications; longer service life
HelicalCoil reinforcementPrevents hose from collapsing during suction/vacuum
Braidedwire or textile weaveSpiraled4 or 6 wire pliesplies wound in alternating directionsHelicalcoil, resists collapse

Hoses with multiple reinforcement layers have an anti-friction layer between them to prevent steel wires from rubbing against each other — extending hose life.


3. The Cover

The Cover is the outermost layer. It protects both the reinforcement and the tube from environmental damage.

The cover shields the hose from:

  • Weather
  • Ozone
  • Abrasion
  • Corrosion
  • Temperature extremes
  • Chemicals

Special Cover Options

For harsh environments where hose-to-hose or hose-to-metal abrasion is a concern, Gates offers:

  • MegaTuff™ Hose Cover — provides 300× the abrasion resistance of standard covers
  • XtraTuff™ Hose Cover — provides 25× the abrasion resistance; designed for mid-range applications

These covers are tested under ISO6945 standards (metal-to-hose rubbing cycles to lose 1 gram of weight).


Key Takeaway

A hydraulic hose is not a simple tube — it’s a precisely engineered assembly. The tube carries the fluid, the reinforcement handles the pressure, and the cover protects it all from the outside world. Understanding these layers helps you select the right hose and identify failure causes.


🧠 Knowledge Check

1. What determines the size of a hydraulic hose?

2. Which type of hose reinforcement is used to prevent collapse during suction or vacuum applications?

3. What is the primary role of the hose cover?

4. Which of the following is NOT a reason hydraulic hose replaced rigid pipes?

5. Spiraled reinforcement typically has how many layers (plies) of wire?