Hose Applications, Fluids & Storage
Module 3 · Hose Applications, Fluids & Storage

Hose Applications, Fluids & Storage

Identify the right Gates hose for every pressure range and fluid type — from extremely high-pressure spiral hoses to marine and fleet applications — and learn how to store hose correctly.

Hydraulic Hose Applications

Gates hydraulic hoses are designed for a world of applications, organized by pressure range.

↑ more reinforcement, higher working pressureExtremely high3,000–6,000 psiEFG3K · EFG4K · EFG5K · EFG6K4 or 6 spiral wiresVery high4,000 psiEFG4K (C12M)4 spiral wiresHighmost commonG2 · M2T · M3K · J2ATwire braidMediumtrucks, buses, fleetG1 · C3H · GT7 · GT8 · C5 familywire / textile braidLow / suctionunder 300 psiGMV · RLA · LOC / LOLtextile or helical

Extremely High-Pressure Hoses

Reinforced with 4 or 6 spiral wires for optimum performance in severe conditions such as hydrostatic transmissions and high-impulse off-road equipment.

HosePressureSAE SpecKey Uses
EFG6K6,000 psiSAE 100R15Snow groomers, blacktop milling, off-road construction
EFG5K5,000 psiSAE 100R13High-impulse off-road construction equipment
EFG4K4,000 psiSAE 100R11/12Very high-pressure construction and mining
EFG3K3,000 psiSAE 100R11/12High-pressure general purpose

Very High-Pressure Hoses

Reinforced with 4 spiral wires; meet governmental agency requirements. Used in construction, mining, and heavy equipment.

  • EFG4K (C12M) — meets/exceeds SAE 100R12; very flexible, bends to ½ the bend radius of SAE 100R12.

High-Pressure Hoses

The most common pressure range. These hoses appear on nearly every type of mobile machinery.

HoseKey FeatureCommon Uses
G2Most popular hose on the marketBackhoes, forklifts, trash trucks, agricultural & construction equipment
M2T (MegaFlex)½ bend radius of G2; SAE 100R16Superior impulse performance; lightweight; tighter bends
M3K3,000 psi all sizesFarm equipment; economical alternative to G2
J2AT (“jack” hose)10,000 psiPorta-Power units; body shops; fire departments

Medium-Pressure Hoses

Used on trucks, buses, and industrial equipment. Each designed for a specific fluid or environment.

HoseKey Fluid/Use
G1Agricultural, snowplows, medium-pressure oil lines
C3HHydraulic oil, antifreeze, water, return lines, car wash wand
PowerClean™ 3000Hot and cold pressure washer applications
GTH (C6H)Hydraulic oil, automatic transmission cooler lines
GT7 / GT7NCPetroleum, water emulsion, synthetic fluids; GT7NC has non-conductive orange cover for aerial lifts
GT7DL / GT7DLNCDual hose (two molded together); forklifts and snowplows
GT8 / GT8NCHigh-pressure lines; GT8NC non-conductive for aerial lifts

Medium-Pressure Fleet Hoses

The Heavy Duty Fleet industry replaced copper tubing with rubber hose. Because copper tubing is measured by OD, a -8C5 hose and -8 copper tubing share the same ID of 13/32”.

HoseKey Feature / Uses
C5CSAE 100R5; air, lube oil, petroleum, air brake lines, power steering (HD commercial only) — not for gasoline or diesel
C5DCPE tube; handles phosphate ester fluids; air, oil, air brake, tilt cab
C5MMarine — diesel fuel, gasoline; Coast Guard approved
C5EHigher temperature; power steering, hot lube, fuel filters, coolant
LP350Liquid or gaseous propane, butane, or combinations
C14 (PTFE)High temperature +400°F; air brake compressor, hot oil, gasoline
PolarSeal®Refrigerant R134A, R12, R22; automotive and truck A/C
ThermoplasticForklifts, snowplows, aerial lifts; lightweight, high-visibility

⚠️ PTFE Electrostatic Warning: Many PTFE applications do not require a conductive tube, but always review the potential for electrostatic discharge. In those cases, use Gates C14CT (conductive PTFE) hose.


Low-Pressure / Suction / Return Lines

Used where working pressures are under 300 psi. Handle hydraulic oil, antifreeze, water, air, and diesel fuels.

HoseKey Feature
GMV — Global MegaVac®Double-spiral helical wire prevents collapse; ½ bend radius of SAE 100R4; return line and suction hose
RLA1-fiber braid; water, glycol, diesel, gasoline, air; meets 30R2 Type 1 and 2
LOC / LOLIndustrial and transportation; petroleum oils, glycol, water, air

Hydraulic Fluids

Most hydraulic fluids are one of three types:

  • Petroleum-based — standard hydraulic oil
  • Water glycol-based
  • Synthetic-based — phosphate ester (fire resistant)

The Shift to Biodegradable Fluids

The industry is switching to environmentally friendly “green” hydraulic fluids. However, many green fluids seep through ordinary hose tubes. Gates EnviroFluid™ hoses address this with a nitrile tube stock that prevents permeation and handles biodegradable fluids up to 250°F (120°C) without performance loss.


Hose Storage

With proper storage, a hose can last 5–7 years on the shelf. These environmental factors shorten shelf life:

  • Temperature extremes
  • Humidity
  • Ozone
  • Oil, solvents, corrosive materials
  • Insects, rodents
  • Radioactivity
  • Heavy objects stacked on hose
  • Sharp bends in stored hose

Ideal Storage Conditions

  • Store on a first-in, first-out basis
  • Keep in a cool, dry area — never exceeding +38°C (+100°F)
  • Avoid direct sunlight, rain, heaters, and electrical equipment
  • Do not crush or stack heavy objects on hose
  • Store in original container
  • NOTE: If stored below freezing, warm hose up before handling, testing, or using

Service Life Considerations

No hose lasts forever. Factors that shorten service life include continuous operation at:

  • Maximum rated working pressure
  • Maximum operating temperature
  • Minimum bend radius

Inspect regularly. Assemblies showing signs of wear or damage must be replaced immediately. To avoid injury or equipment damage: always ensure proper selection, proper installation, and proper maintenance.


🧠 Knowledge Check

1. Which Gates hose is known as the 'most popular hose in the hydraulic market' and is found on nearly every mobile application?

2. Which hose is specifically Coast Guard approved for marine diesel fuel and gasoline applications?

3. What type of reinforcement does the GMV Global MegaVac® hose use, and why?

4. What is the maximum storage temperature recommended for hydraulic hose?

5. Which of the following is NOT a factor that shortens hose shelf life during storage?

6. The J2AT 'jack hose' is designed for applications up to what pressure?