Locks, Tags, and Lockout Devices
Module 2 · Program, People, and Devices

Locks, Tags, and Lockout Devices

Learn OSHA's requirements for lockout and tagout devices (durable, standardized, substantial, and identifiable), the limits of tags, the one-person-one-lock-one-key rule, and the hardware used for breakers, valves, plugs, and group isolation.

Lockout vs. Tagout

  • Lockout: a lock holds the energy-isolating device in the safe position. It can’t be removed without the key or excessive force.
  • Tagout: a tag is attached to the isolating device as a warning. It does not physically stop anyone.

OSHA prefers lockout. If an isolating device can accept a lock, you must use lockout unless the employer can show that a tagout program gives full employee protection, meaning protection equivalent to lockout.


Device Requirements

OSHA requires lockout and tagout devices to be:

RequirementWhat it means
Provided by the employerWorkers don’t bring random padlocks from home
Singularly identifiedUsed only for energy control, never to lock toolboxes or lockers
DurableWithstand the environment; tags stay legible in wet, hot, or chemical areas
StandardizedConsistent within the facility by color, shape, or size; tags use a consistent print and format
SubstantialLocks can’t be removed without excessive force such as bolt cutters; tag attachments are non-reusable, self-locking, attachable by hand, with a minimum unlocking strength of at least 50 pounds (like a one-piece nylon cable tie)
IdentifiableShow who applied the device

Tags must carry a clear warning such as DO NOT START, DO NOT OPEN, DO NOT CLOSE, DO NOT ENERGIZE, or DO NOT OPERATE.

One Person, One Lock, One Key

Every authorized employee working on the equipment applies their own personal lock, and only they hold the key. No shared keys and no “master” lock that covers everyone without their own lock on it.

Many plants add a photo, name, and department label to each person’s lock.


The Limits of Tags

Training must make sure everyone understands that tags:

  • Are warnings, not physical restraints
  • Must never be bypassed, ignored, or removed without authorization
  • Must be legible and understandable to everyone in the area
  • Can be torn off or deteriorate in harsh environments
  • May create a false sense of security

When tagout is used where a lock could fit, additional measures are needed for full protection, such as removing an isolating circuit element, blocking a controlling switch, opening an extra disconnect, or removing a valve handle.


Common Lockout Hardware

DeviceUse
Personal safety padlockThe basic lock; non-conductive bodies are common for electrical work
Hasp (scissor)Lets several people put locks on one point
Circuit breaker lockoutClamps onto a breaker handle in OFF so it accepts a lock
Plug lockoutEncloses a plug so it can’t be inserted
Ball valve lockoutHolds a quarter-turn handle closed
Gate valve coverEncloses a handwheel so it can’t turn
Cable lockoutSteel cable threads through several devices for one lock point
Group lockboxHolds keys for many isolation points; each worker puts their own lock on the box
Blocks, pins, and cribbingPhysically restrain gravity loads and mechanisms
⚠️ Common Pitfall: The Lock That Isn't Really Holding Anything

Common mistake: a breaker lockout device that fits loosely, or a valve lockout that lets the handle move a few degrees, or a lock through a disconnect whose handle can still be moved by forcing it.

Always test that the locked device truly can’t be moved to the ON or OPEN position. If the hardware doesn’t fit, get the right device. Don’t improvise with zip ties and tape.


Key Takeaway

Lockout physically prevents operation; tagout only warns. Devices must be employer-provided, singularly identified, durable, standardized, substantial, and identifiable. Tag ties need 50 lb minimum strength. Follow one person, one lock, one key. Use the right hardware and test that it really holds.

🧪 Try It: Audit Your Locks

Look at your facility’s LOTO station or your own kit:

  1. Are locks a standard color or style used only for LOTO?
  2. Is each lock identified with a name (and ideally a photo)?
  3. Do tags have a clear warning and room for name, date, and reason?
  4. Are tag ties self-locking and rated?
  5. Do you have the right devices for every isolation point in your area (breakers, valves, plugs)?
🧠 Knowledge Check

1. What is the key difference between a lock and a tag?

2. What minimum unlocking strength must tag attachment devices have?

3. What does 'singularly identified' mean for LOTO locks?

4. Three mechanics need to lock out one disconnect that has room for only one lock. What should they use?