Terminal Equipment and Waterfront Jobs
Identify the machines that move containers through a terminal, including yard tractors, straddle carriers, RTGs, top handlers, reach stackers, and empty handlers, and the jobs that keep a ship working.
Container Handling Equipment
| Equipment | What it does | Notes |
|---|---|---|
| Ship-to-shore (STS) crane | Lifts containers between ship and wharf | The largest machines on the terminal; covered in Module 2 |
| Yard tractor (UTR, hostler) | Pulls containers on chassis or bomb carts between crane and yard | Fast, numerous, and a major source of traffic hazards |
| Straddle carrier | Straddles a container, lifts it, and carries it; can stack 1-over-2 or more | Combines transport and stacking |
| Rubber-tired gantry (RTG) | Spans several rows of containers in the yard and stacks them | Moves between blocks on tires; many now electric or hybrid |
| Rail-mounted gantry (RMG) / automated stacking crane (ASC) | Like an RTG but on rails; often automated | Common in rail yards and automated terminals |
| Top handler (top pick) | Large forklift with a spreader that lifts loaded containers from the top | Flexible; used in many smaller terminals |
| Reach stacker | Telescoping boom with a spreader; can reach second and third rows | Versatile; common in rail and smaller yards |
| Empty handler (side pick) | Lifts empty containers by their side corner castings | Lighter-duty, for stacking empties high |
| Mobile harbor crane | Wheeled crane on the wharf | Handles containers, breakbulk, and bulk where STS cranes aren’t installed |
The Spreader
Most container equipment lifts with a spreader: a frame that lowers onto the container’s top corner castings and locks into them with twistlocks. Spreaders are often telescopic (adjusting for 20-, 40-, and 45-foot boxes), and some can lift two 20-foot containers at once (twin-lift).
Indicator lights in the cab show when the spreader is landed and when twistlocks are locked or unlocked. Never hoist without “locked” confirmation.
Jobs on the Waterfront
| Role | What they do |
|---|---|
| Crane operator | Runs the STS or yard crane from the cab or a remote station |
| Signal person / hatch tender | Guides the crane operator when the load or landing spot is out of view |
| Lasher | Secures and releases container lashings aboard ship (Module 5) |
| Equipment operator | Drives yard tractors, straddle carriers, top handlers, and RTGs |
| Clerk / checker | Verifies container numbers, seals, damage, and moves in the TOS |
| Foreman / supervisor (walking boss) | Directs a gang or an operation |
| Planner | Plans vessel stowage, yard layout, and equipment assignments |
| Mechanic / electrician | Maintains cranes and equipment; often specialized in hydraulics, drives, and controls |
| Marine terminal security | Gate control, access, and TWIC compliance |
On the U.S. West Coast, longshore work is typically dispatched through hiring halls under agreements between the ILWU and employers. Many workers start in entry-level roles and train up into skilled positions such as crane operator.
Access and Credentials
- TWIC (Transportation Worker Identification Credential) is required for unescorted access to secure areas of regulated maritime facilities.
- Equipment operators complete terminal-specific training and certification for each machine.
- High-visibility clothing, hard hats, and safety footwear are standard in operating areas.
Common mistake: a pedestrian or checker assumes a straddle carrier or top handler driver can see them because they can see the machine.
Many terminal machines have large blind spots, especially close in and behind. Make eye contact or get a signal before crossing, use designated walkways, and stay out of equipment lanes.
Key Takeaway
Terminals use STS cranes at the berth, yard tractors or straddle carriers to move boxes, and RTGs, RMGs, top handlers, reach stackers, and empty handlers in the yard. The spreader locks into corner castings with twistlocks. Waterfront jobs range from crane operators and lashers to clerks, planners, and mechanics. Access requires TWIC and machine-specific training.
- Stacking empty containers six high in a depot. (Empty handler.)
- Lifting a loaded 40-ft box off a rail car in a small yard, reaching to the second track. (Reach stacker.)
- Stacking import boxes in a block five wide and four high. (RTG.)
- Moving a box from under the STS crane to the yard on a chassis. (Yard tractor.)
1. How does a spreader attach to a container?
Twistlocks on the spreader rotate inside the container's corner castings to lock on.
2. Which machine straddles a container and can both carry and stack it?
Straddle carriers combine horizontal transport and stacking.
3. What must be confirmed before hoisting a container with a spreader?
Hoisting without confirmed locks can drop the container.
4. What credential is required for unescorted access to secure areas of regulated maritime facilities?
The Transportation Worker Identification Credential controls access to secure maritime areas.