Ship-to-Shore Crane Anatomy and Motions
Module 2 · Cranes

Ship-to-Shore Crane Anatomy and Motions

Learn the parts of a ship-to-shore container crane (gantry, boom, trolley, headblock, and spreader), its four motions, outreach and lift height, anti-sway, and the wind and storm protections that keep it standing.

The Giants on the Wharf

A ship-to-shore (STS) container crane is a huge steel gantry that travels along rails on the wharf and reaches out over the ship to lift containers in and out of the cells and off the deck.

shipmachinerytrolley + cabspreaderoutreach (from waterside rail)backreachlift heightportal (legs)gantry wheels on rails along the wharfbackreach girderboom
PartJob
Portal (legs and sill beams)Structure that straddles the apron lanes
Gantry travel systemWheels on rails let the crane move along the wharf to line up with each ship bay
BoomExtends over the ship; on many cranes it hinges up to clear the ship’s superstructure when the vessel arrives and departs
Backreach girderExtends landside for handling hatch covers and buffer space
TrolleyRuns along the boom and girder, carrying the load (and often the operator cab)
HoistRaises and lowers the load with wire ropes
HeadblockConnects the hoist ropes to the spreader
SpreaderLocks onto the container’s corner castings
Machinery houseHolds hoist and trolley drives and electrical equipment
Operator cabUsually rides with the trolley, with a downward view through the floor

The Four Motions

MotionWhat movesDirection
HoistThe spreader and loadUp and down
TrolleyThe trolley along the boomWaterside and landside
GantryThe entire crane along the railsAlong the wharf
Boom hoistThe boom raises or lowersUsually only when the crane is not working cargo

A skilled operator blends hoist and trolley motions smoothly while controlling sway, the swinging of the load on the ropes. Modern cranes have anti-sway systems and automation aids, but operator skill still matters.


Size: Outreach and Lift Height

  • Outreach is how far the crane reaches over the water from the waterside rail. It determines how many containers across the crane can work. The largest ships today are more than 20 containers wide.
  • Lift height is the height under the spreader above the rail. It must clear containers stacked high on deck.

As ships grow, ports raise existing cranes or buy larger ones.


Wind and Storms

Cranes act like sails. They’re designed to operate only up to a set wind speed limit (from the maker and terminal rules), and to survive much higher wind when properly secured.

  • Anemometers on the crane trigger warnings and stop work.
  • Rail clamps and brakes resist being pushed along the rails.
  • Stowage pins and tie-downs anchor the crane to the wharf in storm conditions.
  • Cranes have been blown along their rails and toppled when not secured in time.
⚠️ Common Pitfall: Working Through a Gusty Afternoon

Common mistake: wind speed hovers near the limit, and the gang keeps working to finish the bay.

Gusts can drive the crane or swing a container into the ship’s structure or a stack. Follow the terminal’s wind procedure. Stop at the limit, park the spreader, and secure the crane as specified, early rather than late.


Key Takeaway

An STS crane is a rail-mounted gantry with a boom, trolley, hoist, headblock, and spreader. Its motions are hoist, trolley, gantry, and boom hoist. Outreach and lift height define the ships it can work. Respect wind limits and secure the crane with clamps, pins, and tie-downs.

🧪 Try It: Crane Fit Check

A terminal’s crane can reach 19 containers across. A new service will bring ships 22 containers wide.

What are the options? (Buy new cranes with greater outreach, modify existing cranes if structurally possible, or decline or limit that service. Also check lift height and wharf strength for heavier cranes.)

🧠 Knowledge Check

1. Which STS crane motion moves the load horizontally along the boom?

2. What does 'outreach' measure?

3. Why do many STS cranes have booms that hinge upward?

4. What secures an STS crane against storm winds?