Container Securing and Other Cargo Types
Module 5 · Cargo Handling and Safety

Container Securing and Other Cargo Types

Learn how containers are secured aboard ship with cell guides, twistlocks, lashing rods, and turnbuckles, why the Cargo Securing Manual matters, how lashers work safely, and how breakbulk, ro-ro, and bulk cargo are handled.

Why Securing Matters

At sea, ships roll, pitch, and heave. Stacks of containers experience huge forces, especially in heavy weather. Poor securing leads to collapsed stacks and containers lost overboard, a danger to the crew, other vessels, and the environment.


Below Deck: Cell Guides

In the holds of most container ships, containers drop into cell guides: vertical steel rails that hold the stacks in place. They need little or no lashing below deck. The crane operator lowers each box into the guides.

On Deck: Lashing Systems

On deck, above the hatch covers, containers are held by a system of fittings:

FittingJob
Stacking conesLocate containers on top of each other (mostly below deck or as specified)
TwistlocksLock container corners together vertically; may be manual, semi-automatic (SATL), or fully automatic
Lashing rodsLong steel rods hooked into container corner castings, angled down to the deck or lashing bridge
TurnbucklesTension the lashing rods
Lashing bridgesRaised platforms between bays that let lashings reach higher tiers
Bridge fittings / buttressesConnect adjacent stacks or brace them

Twistlock Types

  • Manual: lashers turn a handle to lock and unlock.
  • Semi-automatic (SATL): locks automatically when a container is landed; must be unlocked manually (often with a pole) before discharge.
  • Fully automatic: locks and releases with crane movement, with no lasher needed at the corners.

On the wharf, workers often insert or remove twistlocks from container corners as the crane hovers. This “cone station” or “coning” work requires strict procedures because people are working right under the load.


The Cargo Securing Manual

Every ship has an approved Cargo Securing Manual (CSM) (required under SOLAS) that specifies how cargo must be stowed and secured, including stack weight limits, lashing patterns, and fittings. The ship’s stowage plan places heavy boxes low and respects limits for each stack.

Overweight or misdeclared containers (see VGM, Lesson 2.2) can overload stacks and lashings even when the lashing is done right.


Lashing Safely

Lashing is one of the more hazardous waterfront jobs:

HazardControl
Heavy rods and turnbucklesProper technique, team handling, ergonomic tools
Working at height on lashing bridges and hatch coversGuardrails, fall protection where required, three points of contact on ladders
Falling objects (twistlocks, rods, debris)Hard hats; stay out from under crane operations
Moving containers overheadCoordinate with the crane and signal person; never be under a suspended load
Trip hazards on deckHousekeeping; lighting at night
WeatherWet, icy, windy conditions on open decks

Other Cargo Types

TypeDescriptionHandling
BreakbulkIndividual pieces: steel, lumber, machinery, project cargoCranes with slings and spreader bars; dunnage and lashing in holds
Ro-ro (roll-on/roll-off)Vehicles and rolling equipment driven aboardDrivers, ramps; vehicles lashed to deck points
Dry bulkGrain, coal, ore, potashConveyors, ship loaders, grab cranes; dust and engulfment hazards
Liquid bulkOil, chemicals, LNGPipelines, loading arms; strict fire and spill controls
Project / heavy liftVery large or heavy items (wind turbine parts, modules)Engineered lift plans, often tandem or ship’s heavy-lift cranes

The Pacific Northwest handles all of these, from containers and autos to grain export terminals along the Columbia River.

⚠️ Common Pitfall: Discharging Without Unlocking

Common mistake: a crane tries to lift a container from a deck stack, but a semi-automatic twistlock at a bottom corner was missed during unlocking.

The crane lifts the container and pulls on the one below, potentially damaging the ship, overloading the crane, or dropping a box. Lashers must confirm all corners unlocked, and operators must lift slowly and stop at any sign of resistance.


Key Takeaway

Below deck, cell guides hold containers. On deck, twistlocks, lashing rods, turnbuckles, and lashing bridges secure the stacks per the ship’s Cargo Securing Manual. Semi-automatic twistlocks must be unlocked before discharge. Lashing involves heavy gear, heights, and overhead loads. Other cargo includes breakbulk, ro-ro, dry bulk, liquid bulk, and project cargo.

🧪 Try It: Find the Fittings

Watch a video of container ship loading or discharge (many ports and shipping lines publish them). Identify:

  1. Cell guides in the hold
  2. Twistlocks being inserted or removed on the wharf
  3. Lashing rods and turnbuckles on deck
  4. A lashing bridge
  5. The signal person or hatch tender
🧠 Knowledge Check

1. What holds containers in place below deck in most container ships?

2. What document specifies how cargo must be secured aboard a ship?

3. What must be done with semi-automatic twistlocks before discharging a deck container?

4. Ro-ro cargo refers to: