Reading Ship Drawings and Welding Symbols
Learn ship orientation and reference terms such as frame numbers, baseline, centerline, and molded lines, the main drawing types used in a yard, and how to read AWS welding symbols for fillet and groove welds.
Speaking Ship
| Term | Meaning |
|---|---|
| Fore / forward | Toward the bow (front) |
| Aft | Toward the stern (back) |
| Port | Left side, looking forward |
| Starboard | Right side, looking forward |
| Inboard / outboard | Toward / away from the centerline |
| Centerline (CL) | Fore-and-aft line down the middle of the ship |
| Baseline (BL) | Horizontal reference line, usually at the bottom of the keel; heights are measured from it |
| Frame numbers | Stations along the length, numbered (usually from aft forward); “Fr. 42” locates a point fore and aft |
| Molded line | Theoretical surface of the structure, often the inside of the shell plating; dimensions are measured to molded lines |
| Half-breadth | Distance from the centerline to a point, measured athwartships (side to side) |
Any point on a ship can be located by frame number (fore and aft), distance off centerline (side to side), and height above baseline (up and down).
Drawing Types
| Drawing | Shows |
|---|---|
| General arrangement (GA) | Overall layout of spaces |
| Lines plan / offsets | Hull shape as sections, waterlines, buttocks; offset tables give coordinates |
| Midship section | Typical cross-section with scantlings (member sizes) |
| Shell expansion | The curved shell flattened out, showing every plate, seam, and butt |
| Construction / structural drawings | Each block, deck, or bulkhead, with members and welds |
| Production / work packages | Cut parts, assembly sequence, weld details for the crew |
Modern yards generate most production drawings from a 3D product model (CAD), and many parts are cut by CNC plasma or laser directly from that model.
Welding Symbols (AWS A2.4)
Welding symbols tell the welder what weld to make, where, and how big. The basic parts:
The Golden Rule: Arrow Side vs. Other Side
- Weld symbol below the reference line → weld on the arrow side of the joint
- Weld symbol above the line → weld on the other side
- Symbols on both sides → weld both sides
Common Weld Symbols
| Symbol | Weld |
|---|---|
| Right triangle | Fillet weld |
| Two parallel lines | Square groove |
| V shape | V-groove |
| Single slanted line with vertical | Bevel groove |
| Small circle at arrow junction | Weld all around |
| Flag at arrow junction | Field weld (done at erection or on site) |
Size, Length, and Pitch
- Size goes to the left of the symbol (for a fillet, the leg length).
- Length-pitch goes to the right. “2-6” means 2-inch welds on 6-inch centers (intermittent).
- No length means a continuous weld for the full joint.
- Chain intermittent (welds opposite each other on both sides) vs. staggered intermittent (offset) are shown by how the symbols line up above and below the line.
Ship drawings may use AWS symbols, ISO 2553 symbols, or the yard’s own standard, so check the drawing’s legend.
Common mistake: reading the fillet triangle without noticing whether it’s above or below the reference line.
Above means the other side. Welding the wrong side of a tee joint leaves the designed side unwelded, and an inspector will reject it (or worse, it’ll be missed). Read every symbol: side, size, length, pitch, process.
Key Takeaway
Locate any point by frame number, distance off centerline, and height above baseline. Know the main drawings: GA, lines, midship section, shell expansion, and structural drawings. On welding symbols, below the line = arrow side, above = other side; size left, length-pitch right; flags mean field weld, circles mean all around.
- A fillet triangle above the line with 5/16 on the left and nothing on the right. (5/16-inch continuous fillet weld on the other side.)
- Fillet triangles above and below, aligned, with 1/4 and 3-12 on each. (1/4-inch chain intermittent fillet welds on both sides, 3 inches long on 12-inch centers.)
- A V-groove symbol below the line with a flag at the arrow junction. (V-groove weld on the arrow side, made in the field.)
1. A fillet weld symbol is drawn below the reference line. Where is the weld made?
Below the reference line means the arrow side of the joint.
2. What does '2-6' to the right of a fillet symbol mean?
Length-pitch: 2-inch-long welds spaced on 6-inch centers.
3. A point on a ship is described as 'Fr. 60, 4 m off CL, 6 m above BL.' What does BL refer to?
Heights are measured from the baseline.
4. Which drawing shows the curved hull shell flattened out with every plate, seam, and butt?
The shell expansion lays the shell plating flat to show plate layout.