Glossary and Course Review
Module 6 · Careers and Review

Glossary and Course Review

Review the vocabulary of shipfitting and marine welding, follow a structural joint from drawing to inspection, and test yourself across the whole course.

From Drawing to Accepted Weld

  1. M1 Drawing

    Location, member, weld symbol

  2. M4 Material

    Grade, heat number, preheat

  3. M2 Fit-up

    Layout, gap, alignment, tacks

  4. M5 Safe to burn

    Testing, permit, fire watch

  5. M3 Weld

    WPS, sequence, distortion control

  6. M4 Inspect

    VT, then NDT as required

Rejected welds are repaired under an approved procedure and re-inspected.

Glossary

TermMeaning
ABS / DNV / LRClassification societies that set ship construction rules
AH36 / DH36 / EH36Higher-strength ship steel grades with increasing toughness
Baseline (BL)Height reference, usually bottom of keel
BlockPrefabricated hull module
BulkheadWall dividing the hull; may be watertight
Ceramic backingRemovable root support for one-sided full-penetration welds
Dogs and wedgesFitting aids to pull plates into alignment
FairingMaking plates and members smooth and true
FCAW / SAW / SMAW / GMAW / GTAWFlux-cored / submerged arc / stick / MIG / TIG
Fire watchTrained person watching for fires during and after hot work
Frame numberFore-and-aft station location
Hogging / saggingHull bending with the middle up / middle down
LongitudinalFore-and-aft stiffener
Marine chemistCertified person who tests and certifies spaces for entry and hot work
Molded lineTheoretical reference surface for dimensions
NDT (VT, MT, PT, UT, RT)Visual, magnetic particle, penetrant, ultrasonic, radiographic testing
PQR / WPS / WPQProcedure qualification record / welding procedure specification / welder qualification
PreheatHeating base metal before welding to prevent cracking
StrongbackStiff beam tacked across a joint to hold alignment
ThroatShortest distance from root to weld face (≈ 0.707 × leg for fillets)
Transition jointExplosion-bonded steel/aluminum strip for joining dissimilar metals

🧪 Try It: Capstone: Joint Package

Pick one structural joint (for example, a stiffener-to-deck fillet weld, or a shell plate butt). Prepare a one-page package:

  1. Location: frame number, distance off centerline, height above baseline
  2. Members and materials: plate thickness, steel grade (e.g., AH36), stiffener size
  3. Welding symbol: draw it, and explain side, size, length, and pitch
  4. Fit-up requirements: gap, bevel, alignment tolerances
  5. Process and WPS: process, filler, position, preheat
  6. Distortion plan: sequence and technique
  7. Safety: hot work testing, fire watch, ventilation, PPE
  8. Inspection: VT plus any required NDT and acceptance criteria
🧠 Knowledge Check

1. Which framing system do large tankers and bulk carriers typically use?

2. A fillet weld symbol is above the reference line with '3/8' on the left. What does it mean?

3. Which process is the common 'workhorse' for structural steel welding in shipyards?

4. How do you prevent hydrogen cracking in thick higher-strength steel?

5. Which NDT method would you use to check an aluminum fillet weld for surface cracks?

6. Before hot work on a bulkhead next to a fuel tank, what is required?